Riverside    (951) 248-1200
Burbank    (818) 842-3667
Signal Hill/Long Beach    (562) 427-7250
 
/images/store/14/1-Reno-Rotate.jpg/images/store/14/7-Reno-Hardware.jpg/images/store/14/10-Reno-Hardware.jpg/images/store/14/14-Reno-Hardware.jpg/images/store/14/17-Reno-Hardware.jpg
/images/store/14/13-Reno-Hardware.jpg/images/store/14/6-Reno-Hardware.jpg/images/store/14/Reno-Rotate-3.jpg/images/store/14/Reno-Rotate-4.jpg
/images/store/14/8-Reno-Hardware.jpg/images/store/14/9-Reno-Hardware.jpg/images/store/14/Reno-Rotate-1.jpg/images/store/14/16-Reno-Hardware.jpg
/images/store/14/11-Reno-Hardware.jpg/images/store/14/12-Reno-Hardware.jpg/images/store/14/18-Reno-Hardware.jpg/images/store/14/15-Reno-Hardware.jpg/images/store/14/5-Reno-Hardware.jpg
 

Search:

Tungsten Carbide lined Metal Jacketed Short Straight Barrel CT Series

CT Series

Clemco

A blast nozzle accelerates the air and abrasive as the mixture exits the end of the hose. The taper and length of the nozzle's inlet and outlet determine the pattern and velocity of the abrasive exiting the nozzle. The composition of the liner material determines its resistance to wear.
(click image to enlarge)
Quick Overview
  • Tungsten Carbide liner material is the most rugged and durable. It is also the best value in a liner material.
  • Short nozzles (CTs) are designed for blasting 3 to 6 inches away from the surface.
  • Expected life with expendable abrasives is approximately 300 hours.
  • 1/2-inch entry provides smooth transition and maximum
Interested in this item or want more information?
Call Mon. through Fri. 6:00 AM - 5:00 PM PST
Phone: 951-248-1200
Email: info@renohardware.com

Can't find what you want? Give us a call and we can help you find it.
Details
Nozzles are sized by the diameter of their orifices in 1/16-inch increments. A No. 2 nozzle has a 2/16-inch (1/8-inch) orifice, a No. 3 nozzle has a 3/16-inch orifice, etc. The size of the nozzle orifice determines abrasive and air consumption. Air consumption is measured in cubic feet per minute (cfm) at a given pressure.

When choosing a nozzle, consider the amount of available air in cfm, the capacity of the blast machine and the inside diameter of the piping, and the blast and air hoses. For optimal performance, these elements must be compatibly sized.

If too large a nozzle is used, low blast pressure and rapid wear on the blast hose will occur. If too small a nozzle is used, smooth media flow will be difficult to achieve.
Additional Information
Manufacturer: Clemco
For More Information on the Tungsten Carbide lined Metal Jacketed Short Straight Barrel CT Series, [Click Here] to Link to Manufacturer Web Site
 
Search:
Facebook Twitter
 
© 2008- Reno Hardware, Inc. | All Rights Reserved
 

Warning: SOME PRODUCTS WE SELL MAY CONTAIN ONE OR MORE CHEMICALS KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS OR REPRODUCTIVE HARM. For more information please visit https://oehha.ca.gov/proposition-65

Powered by 48ws.com